Sony Receiver responses (DSP:200; 120)
These are the responses to 192/112 (preamp/amp) commands.
SonyDSP:200; 120
Command Code |
Parameter List and Function |
5 |
none Ignored |
14 |
none Unavailable |
15 |
none Error |
46 |
none Power On |
47 |
none Power Off |
64 |
<volume> Returns volume
level. |
72 |
<input> <ASCII> Returns name of
input. |
97 |
5 unknown bytes Returns info
about model of receiver? |
112 |
<audio input> <video input> <audio
in status> <input device> Returns status
information about the current input. |
Parameters
Parameter Name |
Description and Format |
<ASCII> |
An ASCII
character. Usually followed by x# in
the parameter listing to indicate the maximum string length. |
<audio in status> |
Always 1? |
<input> <audio input> <video input> |
The input’s code
number. Here is the list: 0 = Tuner 1 = Phono 2 = CD 3 = DAT 4 = MD/DAT 5 = Tape 16 = Video 1 17 = Video 2 18 = Video 3 19 = Video 4 21 = DVD/LD 22 = TV/Sat 25 = DVD/LD
(alt.) 254 = nothing
(used for audio inputs with no video) |
<input device> |
The device code
number of the device the receiver thinks is attached on the other end of the
current input. It’s not very clear how
it determines this, especially for non-Sony devices. 255=nothing. |