NOTE: If youfind that only half of the buttons work using the SAT/0566 setup code, this means that you should be using the SAT/0392 setup code. However, this code is not installed in remotes like the Cinema 7, so you will have to use learning to fix the non-working buttons.
"Power On" EFC=227 "Power Off" EFC=219 "Power Toggle" EFC=099 "Channel-" EFC=051 "Channel+" EFC=043 "1" EFC=139 "2" EFC=163 "3" EFC=155 "4" EFC=115 "5" EFC=107 "6" EFC=131 "7" EFC=123 "8" EFC=211 "9" EFC=203 "0" EFC=147 "Enter" EFC=109 "GUIDE" EFC=226 "CLEAR" EFC=002 "Favorite" EFC=009 "Prev Channel" EFC=251 "Commercial Skip" EFC=152 "Up" EFC=200 "Down" EFC=208 "Left" EFC=128 "Right" EFC=120 "Select/Info" EFC=179 "Input Toggle" EFC=248 "Alt Audio" EFC=143 "SAP Discrete" EFC=140 "HDTV Monitor On/Off" EFC=026 "HDTV Monitor Discrete On" EFC=094 "HDTV Monitor Discrete Off (SD)" EFC=078 "Ant/DSS Input Toggle" EFC=023 "TV Discrete" EFC=060 "DSS Discrete" EFC=036 "Antenna A/B Toggle" EFC=234 "Ant-A Discrete" EFC=044 "Ant-B Discrete" EFC=084 "Screen Size Toggle" EFC=142 "Screen Size 16:9" EFC=126 "Screen Size 4:3" EFC=118 "Screen Format Toggle" EFC=178 "Normal/Letterbox" EFC=092 "Full/Cropped" EFC=068 "Fill screen" EFC=076 "Service Mode" EFC=074 "System Shutdown" EFC=090 "Mute?" EFC=187
|