These codes are under CD device code 0028, they are for older Kenwood receivers. They were taken from Kenwood remotes RC-80 and RC-R0502. Not all of the features will work on all receivers. Some additional features were found under AMP device code 0314, but this code is not available on the Radio Shack 15-1994 remote, it is on the OFA Cinema 7. (Newer Kenwood receivers, like the VR309, use AMP codes 0313 and 0314).
OBC - EFC - Function 008 - 053 - CD Next Disc 009 - 057 - CD 10+ 011 - 059 - Surround Center 014 - 054 - CD Display toggle 015 - 058 - Surround Eq Effect 064 - 165 - System Memory M1 065 - 169 - System Memory M2 077 - 040 - Surround Delay 086 - 102 - Test Tone 128 - 189 - '0' 129 - 193 - '1' 130 - 191 - '2' 131 - 195 - '3' 132 - 188 - '4' 133 - 192 - '5' 134 - 190 - '6' 135 - 194 - '7' 136 - 061 - '8' 137 - 065 - '9' 140 - 060 - Tuner P.Call Down 142 - 062 - Tuner AM 143 - 066 - Tuner - band (or FM) 149 - 128 - Tape2 Monitor 153 - 001 - Tuner P.Call Up 154 - 255 - Vol Down 155 - 003 - Vol Up 156 - 252 - Mute 157 - 000 - Power 158 - 254 - Tuner Direct 159 - 002 - Tuner A?B 166 - 222 - CD Rewind 167 - 226 - CD F/Forward 168 - 093 - CD Next Disc 173 - 096 - CD 10+ 174 - 094 - CD Display toggle 192 - 173 - Phono Stop 193 - 177 - Phono Play 197 - 176 - Surround Eq (M Call) 198 - 174 - Rear Vol Down 199 - 178 - Surround Rear (or Rear Vol Up) 201 - 049 - CD Stop 203 - 051 - CD Play/Pause 204 - 044 - CD Repeat toggle 206 - 046 - CD Prev Track 207 - 050 - CD Next Track 208 - 109 - Tape A: play <-- 209 - 113 - Tape A: play --> 210 - 111 - Tape A: rewind 211 - 115 - Tape A: f/forward 213 - 112 - Tape A: Stop 215 - 114 - Surround Mode 216 - 237 - Tape B: play <-- 217 - 241 - Tape B: play --> 218 - 239 - Tape B: rewind 219 - 243 - Tape B: f/forward 220 - 236 - Tape B: pause 221 - 240 - Tape B: Stop 222 - 238 - Tape B: record Direct Inputs for older receivers 144 - 125 - Phono Direct 145 - 129 - Tuner Direct 146 - 127 - CD Direct 148 - 124 - Tape 1 Direct 149 - 128 - Tape 2 Direct 150 - 126 - Video 1 Direct 147 - 131 - Video 2 Direct 138 - 063 - Video 3 Direct Funtions under AMP Device code 0314: 145 - 129 - Multi Level Down 146 - 127 - Multi Level Up 204 - 044 - Input Select
|